本文首发于个人博客https://kezunlin.me/post/5076bc45/,欢迎阅读!
ubuntu network configuration
Guide
network proxy
- System wide: Network--->None/Manual
- chrome: can not set
- firefox: about:preferences---> Network Proxy
eth0 config
rename xxx to eth0
errors may occur:
Ubuntu networking restart | cannot find device 'eth0'
check eth0
$ dmesg | grep eth
[5.715564] e1000 0000:02:01.0 eth0: (PCI:66MHz:32-bit) 00:0c:29:7d:bf:43
[5.715573] e1000 0000:02:01.0 eth0: Intel(R) PRO/1000 Network Connection
[5.719709] e1000 0000:02:01.0 ens33: renamed from eth0
and we get ens33
renamed from eth0
, we need to change it back to eth0
.
solution
(1). edit grub and update
$ sudo vim /etc/default/grub
#GRUB_CMDLINE_LINUX=""
GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0"
$ sudo update-grub
(2) edit network interfaces
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.77
netmask 255.255.255.0
gateway 192.168.1.1
(3) reboot
sudo reboot now
(4) check eth0
$ sudo ifconfig
eth0 Link encap:Ethernet HWaddr 80:fa:5b:47:92:8a
inet addr:192.168.1.77 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:4640 errors:0 dropped:0 overruns:0 frame:0
TX packets:4640 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:865530 (865.5 KB) TX bytes:865530 (865.5 KB)
wlan0 Link encap:Ethernet HWaddr b0:35:9f:53:68:c6
inet addr:192.168.0.130 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::a3d7:e190:6fb3:133/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:6536 errors:0 dropped:0 overruns:0 frame:0
TX packets:380 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:581427 (581.4 KB) TX bytes:46439 (46.4 KB)
OK. Now we get eth0
,wlan0
properly set.
Reference
History
- 20180108: created
- 20180222: add eth0 part.
Copyright
- Post author: kezunlin
- Post link: https://kezunlin.me/post/5076bc45/
- Copyright Notice: All articles in this blog are licensed under CC BY-NC-SA 3.0 unless stating additionally.